Original file

Mercedes-Benz GLC220 Bosch EDC17CP57 CR43-651-HGY0-X253WAX_AJ17_NAG3-120 / 038695

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC220, hardware number CR43-651-HGY0-X253WAX_AJ17_NAG3-120 and software number 038695, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC220OM651 · 163.0PS / 119.9kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR43-651-HGY0-X253WAX_AJ17_NAG3-120
Software number
038695
Bosch part / software
10SW038695
Software / calibration
6519021503

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC220
EngineOM651
FuelDiesel
Displacement2.2
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR43-651-HGY0-X253WAX_AJ17_NAG3-120
Software number038695
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key4df97ed57111e63d
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW038695Offset in the file: 0x02001A
Software / calibration6519021503Offset in the file: 0x088373
Data set number6519031256Offset in the file: 0x08837E
Boot software6519040401Offset in the file: 0x088368
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HGY0__CV181700///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR43-651-HGY0-X253WAX_AJ17_NAG3-120 and software number 038695. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz GLCFlash2,048.00 KB€15Add to cart
Mercedes-Benz GLC220Flash4,096.00 KB€15Add to cart

All reads of CR43-651-HGY0-X253WAX_AJ17_NAG3-120 / 038695

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page