Original file

Mercedes-Benz GLC220 Bosch EDC17CP57 CR43-651-HIY0-X253WAX_AJ17_NAG3-125 / 10SW090491

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC220, hardware number CR43-651-HIY0-X253WAX_AJ17_NAG3-125 and software number 10SW090491, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC220OM651 · 163.0PS / 119.9kW
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR43-651-HIY0-X253WAX_AJ17_NAG3-125
Software number
10SW090491
Software / calibration
6519020304

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC220
EngineOM651
FuelDiesel
Displacement2.2
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR43-651-HIY0-X253WAX_AJ17_NAG3-125
Software number10SW090491
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key82b968f0e5fa266c
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW090491Offset in the file: 0x02001A
Software / calibration6519020304Offset in the file: 0x087A05
Data set number6519030880Offset in the file: 0x087A10
Boot software6519040401Offset in the file: 0x0879FA
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_HIY0__CV202600///Offset in the file: 0x021140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR43-651-HIY0-X253WAX_AJ17_NAG3-125 and software number 10SW090491. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page