Original file

Mercedes-Benz X-Class Bosch EDC17CP57 CR61_470-53Q0-VS40-OM642LS-EU5III-ME2 / 10SW048837

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz X-Class, hardware number CR61_470-53Q0-VS40-OM642LS-EU5III-ME2 and software number 10SW048837, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz X-Classdiesel 258PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR61_470-53Q0-VS40-OM642LS-EU5III-ME2
Software number
10SW048837
Software / calibration
6429026503

Technical data

Vehicle
BrandMercedes-Benz
Car modelX-Class
Enginediesel 258PS
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR61_470-53Q0-VS40-OM642LS-EU5III-ME2
Software number10SW048837
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6e18a2b24bda17b7
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW048837Offset in the file: 0x22001A
Software / calibration6429026503Offset in the file: 0x27E9CD
Data set number6429034514Offset in the file: 0x27E9D8
Boot software6429040800Offset in the file: 0x27E9C2
Bosch project identifier (EPK)48/1/EDC17CP57/1/P1652//P_1652_53Q0__CV185000///Offset in the file: 0x221140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR61_470-53Q0-VS40-OM642LS-EU5III-ME2 and software number 10SW048837. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

HardwareSoftwareVehicles
CR61_470-52Q0-VS40-OM642LS-EU610SW017475Mercedes-Benz X350
CR61_470-52Q0-VS40-OM642LS-EU6BIII-ME110SW017475Mercedes-Benz X
CR61_470-52Q0-VS40-OM642LS-EU6BIII-ME110SW039119Mercedes-Benz X350, Mercedes-Benz X, Mercedes-Benz X-Klasse
CR61_470-53Q0-VS40-OM642LS-EU5III-ME210SW017475Mercedes-Benz X, Mercedes-Benz X-Class
CR61_470-53Q0-VS40-OM642LS-EU6C-ME210SW017475Mercedes-Benz X
CR61_470-53Q0-VS40-OM642LS-EU6C-ME210SW048838Mercedes-Benz X, Mercedes-Benz X-Class
EDC17CP571037524978Mercedes-Benz Sprinter
NAG3-150KW-CH4O1037524978Mercedes-Benz Benz GLE350

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page