Original file
Mercedes-Benz E350 Bosch EDC17CP57 CR61-DCB1-207CA-642LS-EU6OPS_4X2_3S-ME02 / 1037535403
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number CR61-DCB1-207CA-642LS-EU6OPS_4X2_3S-ME02 and software number 1037535403, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E3503.0 diesel 256PS
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR61-DCB1-207CA-642LS-EU6OPS_4X2_3S-ME02
- Software number
- 1037535403
- Software / calibration
- 6429029201
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E350 |
| Engine | 3.0 diesel 256PS |
| Power | 256.0PS / 188.3kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-DCB1-207CA-642LS-EU6OPS_4X2_3S-ME02 |
| Software number | 1037535403 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | df57fd17aea3031e |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037535403 | Offset in the file: 0x02001A |
| Software / calibration | 6429029201 | Offset in the file: 0x077A57 |
| Data set number | 6429033706 | Offset in the file: 0x077A62 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_DCB1__CV124500/// | Offset in the file: 0x020BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-DCB1-207CA-642LS-EU6OPS_4X2_3S-ME02 and software number 1037535403. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR43NFZ-651-EJG1-906A-120 | 1037524978 | Mercedes-Benz Sprinter |
| CR61-642LS-BBB0-PSTDL-212WA-642LS-EU6OPS_4X2_3S-004C_GUESI_BE | Mercedes-Benz E350 | |
| CR61-642LS-BBB1-PSTDL-222WA-642LS-EU6OP_4X2_3S-003_GUESI_B | Mercedes-Benz S222 | |
| CR61-DCB1-207AA-642LS-EU6OPS_4X2_3S-ME02 | 1037524982 | Mercedes-Benz E |
| CR61-DCB1-212SA-642LS-EU6OPS_4X2_3S-ME03 | 1037524982 | Mercedes-Benz E |
| CR61-DCB1-212SA-642LS-EU6OPS_4X2_3S-ME03 | 1037533184 | Mercedes-Benz E350 |
| CR61-DCB1-212SA-642LS-EU6OPS_4X2_3S-ME04 | 1037533904 | Mercedes-Benz E-Class T-Model |
| CR61-DCB1-212SA-642LS-EU6OPS_4X2_3S_RED-ME02_01 | 1037524982 | Mercedes-Benz S |