Original file
Mercedes-Benz CLS350 Bosch EDC17CP57 CR61-DCB1-218CA-642LS-EU6OPS_4x4_3S-ME04 / 1037533899
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz CLS350, hardware number CR61-DCB1-218CA-642LS-EU6OPS_4x4_3S-ME04 and software number 1037533899, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz CLS3503.0 diesel · 251.0PS / 184.6kW
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR61-DCB1-218CA-642LS-EU6OPS_4x4_3S-ME04
- Software number
- 1037533899
- Software / calibration
- 6429029201
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | CLS350 |
| Engine | 3.0 diesel |
| Power | 251.0PS / 184.6kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-DCB1-218CA-642LS-EU6OPS_4x4_3S-ME04 |
| Software number | 1037533899 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | cedadadd7238ecb5 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037533899 | Offset in the file: 0x02001A |
| Software / calibration | 6429029201 | Offset in the file: 0x077A57 |
| Data set number | 6429038405 | Offset in the file: 0x077A62 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_DCB1__CV124500/// | Offset in the file: 0x020BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-DCB1-218CA-642LS-EU6OPS_4x4_3S-ME04 and software number 1037533899. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-DCB1-218CA-642LS-EU6OPS_4X2_3S-ME04 | 1037533901 | Mercedes-Benz CLS |
| CR61-DCB1-218CA-642LS-EU6OPS_4X4_3S-ME03_01 | 1037533170 | Mercedes-Benz CLS |
| CR61-DCB1-218CA-642LS-EU6OPS_4x2_3S-ME03_01 | 1037533183 | Mercedes-Benz CLS |
| CR61-DCB1-218CA-642LS-EU6OPS_4x2_3S-ME04 | 1037524982 | Mercedes-Benz CLS350 |
| CR61-DCH1-222WA-642LS-EU6OPS_4X2_3S_ECO1-ME04 | 1037534021 | Mercedes-Benz S350 |
| CR61-DCH2-222WA-642LS-EU6OPS_4X2_3S_ECO1-ME05 | 1037524982 | Mercedes-Benz S350 |
| CR61-DCH2-222WA-642LS-EU6OPS_4X2_3S_ECO1-ME05 | 1037535914 | Mercedes-Benz S350, Mercedes-Benz S, Mercedes-Benz Benz 350CDI |
| CR61-DCH2-222WA-642LS-EU6OPS_4x2_3S_Eco1-ME05 | 1037524982 | Mercedes-Benz S350 |