Original file

Mercedes-Benz E350 Bosch EDC17CP57 CR61-DDB4-212WA-642LS-EU6OPS_4x2_3S-ME06 / 1037524982

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number CR61-DDB4-212WA-642LS-EU6OPS_4x2_3S-ME06 and software number 1037524982, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E350OM642 · 250.0PS / 183.9kW
Control unit
Bosch EDC17CP57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
CR61-DDB4-212WA-642LS-EU6OPS_4x2_3S-ME06
Software number
1037524982
Bosch part / software
1037552806
Software / calibration
6429023802

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
EngineOM642
FuelDiesel
Displacement3.0
Power250.0PS / 183.9kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR61-DDB4-212WA-642LS-EU6OPS_4x2_3S-ME06
Software number1037524982
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyca1910f07a5507cb
Identification read from the file
ECU nameEDC17CP57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037552806Offset in the file: 0x02001A
Software / calibration6429023802Offset in the file: 0x02022F
Data set number6429036308Offset in the file: 0x27842E
Boot software0009040200Offset in the file: 0x00FC4D
Internal build string001_2.2.00_CFG03Offset in the file: 0x00FC24
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDB4__CV144900///Offset in the file: 0x064DE0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR61-DDB4-212WA-642LS-EU6OPS_4x2_3S-ME06 and software number 1037524982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page