Original file

Bosch EDC17CP57 CR61-DDB4-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME04 / 1037552806

An original (stock) flash read of the Bosch EDC17CP57 control unit, hardware number CR61-DDB4-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME04 and software number 1037552806, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
CR61-DDB4-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME04
Software number
1037552806
Software / calibration
P_695_DDB4__CV144900

Technical data

Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR61-DDB4-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME04
Software number1037552806
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyca08db4788c9a036
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software1037552806Offset in the file: 0x02001A
Software / calibrationP_695_DDB4__CV144900Offset in the file: 0x020BC0
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_DDB4__CV144900///Offset in the file: 0x020BC0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR61-DDB4-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME04 and software number 1037552806. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page