Original file
Mercedes-Benz E Coupe Bosch EDC17CP57 CR61-DDB5-207CA-642LS-EU6OPS_4X2_3S-ME05 / 10SW004639
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E Coupe, hardware number CR61-DDB5-207CA-642LS-EU6OPS_4X2_3S-ME05 and software number 10SW004639, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E Coupe3.0 diesel 258PS
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 896.00 KB · Flash
- Hardware number
- CR61-DDB5-207CA-642LS-EU6OPS_4X2_3S-ME05
- Software number
- 10SW004639
- Software / calibration
- 6429025402
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E Coupe |
| Engine | 3.0 diesel 258PS |
| Power | 258PS / 189.8kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-DDB5-207CA-642LS-EU6OPS_4X2_3S-ME05 |
| Software number | 10SW004639 |
| File type | Original flash read |
|---|---|
| File size | 896.00 KB (917,504 bytes) |
| File key | 59f55587aeafd923 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW004639 | Offset in the file: 0x00001A |
| Software / calibration | 6429025402 | Offset in the file: 0x058423 |
| Data set number | 6429035509 | Offset in the file: 0x05842E |
| Boot software | 0009040200 | Offset in the file: 0x058418 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_DDB5__CV152600/// | Offset in the file: 0x000BC0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-DDB5-207CA-642LS-EU6OPS_4X2_3S-ME05 and software number 10SW004639. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-DDB4-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME04 | 1037552806 | |
| CR61-DDB5-207AA-642LS-EU6OPS_4X2_3S-ME05 | 10SW004640 | Mercedes-Benz E Coupe |
| CR61-DDB5-207AA-642LS-EU6OPS_4X2_3S-ME06 | 10SW008656 | Mercedes-Benz E Coupe |
| CR61-DDB5-207AA-642LS-EU6OPS_4X2_3S-ME07 | 10SW010460 | Mercedes-Benz E Coupe |
| CR61-DDB5-207CA-642LS-EU6OPS_4X2_3S-ME06 | 10SW008655 | Mercedes-Benz E Coupe |
| CR61-DDB5-207CA-642LS-EU6OPS_4X2_3S-ME07 | 10SW010459 | Mercedes-Benz E Coupe |
| CR61-DDB5-212SA-642LS-EU6OPS_4X2_3S-ME07 | 10SW004633 | Mercedes-Benz E |
| CR61-DDB5-212SA-642LS-EU6OPS_4X2_3S-ME08 | 10SW008663 | Mercedes-Benz E350 |