Original file
Mercedes-Benz CLS-Class Bosch EDC17CP57 CR61-DDB5-218XA-642LS-EU6OPS_4X4_3S_NAG2-ME10 / 1037524982
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz CLS-Class, hardware number CR61-DDB5-218XA-642LS-EU6OPS_4X4_3S_NAG2-ME10 and software number 1037524982, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz CLS-Class3.0 diesel 251PS
- Control unit
- Bosch EDC17CP57
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR61-DDB5-218XA-642LS-EU6OPS_4X4_3S_NAG2-ME10
- Software number
- 1037524982
- Bosch part / software
- 10SW004511
- Software / calibration
- 6429025402
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | CLS-Class |
| Engine | 3.0 diesel 251PS |
| Power | 251.0PS / 184.6kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-DDB5-218XA-642LS-EU6OPS_4X4_3S_NAG2-ME10 |
| Software number | 1037524982 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | e5b16a3ceef38fb2 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW004511 | Offset in the file: 0x02001A |
| Software / calibration | 6429025402 | Offset in the file: 0x02022F |
| Data set number | 6429032211 | Offset in the file: 0x27842E |
| Boot software | 0009040200 | Offset in the file: 0x00FC4D |
| Internal build string | 001_2.2.00_CFG03 | Offset in the file: 0x00FC24 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_DDB5__CV152600/// | Offset in the file: 0x064DD8 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-DDB5-218XA-642LS-EU6OPS_4X4_3S_NAG2-ME10 and software number 1037524982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-DDB5-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME09 | 010472 | Mercedes-Benz E350 |
| CR61-DDB5-212WSA-642LS-EU6OPS_4x2_3S_NAG3-ME09 | 10SW010472 | Mercedes-Benz E350 |
| CR61-DDB5-218CA-642LS-EU6OPS_4X4_3S_NAG2-ME09 | 10SW008670 | Mercedes-Benz CLS |
| CR61-DDB5-218XA-642LS-EU6OPS_4X4_3S_NAG2-ME09 | 10SW008671 | Mercedes-Benz CLS |
| CR61-DDB5-218XA-642LS-EU6OPS_4X4_3S_NAG2-ME10 | 10SW010463 | Mercedes-Benz CLS350 |
| CR61-DDH2-222WVA-642LS-EU6OPS_4 | 1037524982 | Mercedes-Benz S350 |
| CR61-DDH2-222WVA-642LS-EU6OPS_4X2_3S_ECO1-ME07 | 1037524982 | Mercedes-Benz S350 |
| CR61-DDH2-222WVA-642LS-EU6OPS_4X2_3S_ECO1-ME07 | 1037540150 | Mercedes-Benz S350, Mercedes-Benz S |