Original file
Mercedes-Benz S Bosch EDC17CP57 CR61-DFH0-222WVA-642LS-EU6OPS_4X4_3S_ECO1_EU6_1-ME22 / 10SW059217
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz S, hardware number CR61-DFH0-222WVA-642LS-EU6OPS_4X4_3S_ECO1_EU6_1-ME22 and software number 10SW059217, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Sdiesel 258PS
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR61-DFH0-222WVA-642LS-EU6OPS_4X4_3S_ECO1_EU6_1-ME22
- Software number
- 10SW059217
- Software / calibration
- 6429026703
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | S |
| Engine | diesel 258PS |
| Displacement | 3.0 |
| Power | 258.3PS / 190.0kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-DFH0-222WVA-642LS-EU6OPS_4X4_3S_ECO1_EU6_1-ME22 |
| Software number | 10SW059217 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 4388292391a1e09b |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW059217 | Offset in the file: 0x22001A |
| Software / calibration | 6429026703 | Offset in the file: 0x27DCCD |
| Data set number | 6429031716 | Offset in the file: 0x27DCD8 |
| Boot software | 0009040200 | Offset in the file: 0x27DCC2 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_DFH0__CV191800/// | Offset in the file: 0x221080 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-DFH0-222WVA-642LS-EU6OPS_4X4_3S_ECO1_EU6_1-ME22 and software number 10SW059217. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-DEB0-218XA-642LS-EU6OPS_4X4_3S_NAG2_NOXTT3-ME11 | 1037524982 | Mercedes-Benz CLS |
| CR61-DEB0-218XA-642LS-EU6OPS_4X4_3S_NAG2_NOXTT3-ME11 | 10SW058805 | Mercedes-Benz CLS-Class, Mercedes-Benz CLS |
| CR61-DFH0-222WVA-642LS-EU6OPS_4X2_3S_ECO1_EU6_1-ME21 | 1037524982 | Mercedes-Benz S |
| CR61-DFH0-222WVA-642LS-EU6OPS_4X2_3S_ECO1_EU6_1-ME21 | 10SW059220 | Mercedes-Benz S350, Mercedes-Benz S-Class |
| CR61-DFH0-222WVA-642LS-EU6OPS_NOXTT3_4X2_3S_ECO1_EU6_1-ME21 | 1037524982 | Mercedes-Benz S |
| CR61-DFH0-222WVA-642LS-EU6OPS_NOXTT3_4X2_3S_ECO1_EU6_1-ME21 | 10SW059221 | Mercedes-Benz S |
| CR61-DFH0-222WVA-642LS-EU6OPS_NOXTT3_4X4_3S_ECO1_EU6_1-ME22 | 10SW059218 | Mercedes-Benz S, Mercedes-Benz S-Class, Mercedes-Benz S350CDI |
| CR61-DGB0-207AA-642LS-EU6OPS_4X2_3S-ME13 | 10SW062564 | Mercedes-Benz E-Class Cabriolet |