Original file

Mercedes-Benz W212 Bosch EDC17CP57 CR61-GDB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME06 / 1037545680

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz W212, hardware number CR61-GDB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME06 and software number 1037545680, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz W212diesel 258PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
CR61-GDB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME06
Software number
1037545680
Software / calibration
6429023002

Technical data

Vehicle
BrandMercedes-Benz
Car modelW212
Enginediesel 258PS
Displacement3.0
Power258PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR61-GDB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME06
Software number1037545680
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameL533CC0
File keyaf257f6acaa8f9ff
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software1037545680Offset in the file: 0x22001A
Software / calibration6429023002Offset in the file: 0x27FF2F
Data set number6429039707Offset in the file: 0x27FF3A
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_GDB0__CV141800///Offset in the file: 0x221140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR61-GDB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME06 and software number 1037545680. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz EFlash896.00 KB€15Add to cart

All reads of CR61-GDB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3-ME06 / 1037545680

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page