Original file
Mercedes-Benz CLS Bosch EDC17CP57 CR61-GDB2-218CA-642LS-EU6OPS_4X4_3S_NAG3_DVE-ME12 / 1037524982
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz CLS, hardware number CR61-GDB2-218CA-642LS-EU6OPS_4X4_3S_NAG3_DVE-ME12 and software number 1037524982, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz CLS3.0 diesel 258PS
- Control unit
- Bosch EDC17CP57
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR61-GDB2-218CA-642LS-EU6OPS_4X4_3S_NAG3_DVE-ME12
- Software number
- 1037524982
- Bosch part / software
- 10SW004295
- Software / calibration
- 6429025502
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | CLS |
| Engine | 3.0 diesel 258PS |
| Power | 258.0PS / 189.8kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-GDB2-218CA-642LS-EU6OPS_4X4_3S_NAG3_DVE-ME12 |
| Software number | 1037524982 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | e2c7d9c732d46d8d |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW004295 | Offset in the file: 0x02001A |
| Software / calibration | 6429025502 | Offset in the file: 0x02022F |
| Data set number | 6429038211 | Offset in the file: 0x27FFBE |
| Boot software | 0009040200 | Offset in the file: 0x00FC4D |
| Internal build string | 001_2.2.00_CFG03 | Offset in the file: 0x00FC24 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_GDB2__CV152500/// | Offset in the file: 0x064384 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-GDB2-218CA-642LS-EU6OPS_4X4_3S_NAG3_DVE-ME12 and software number 1037524982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-GDB2-218CA-642LS-EU6OPS_4X2_3S_NAG3_DVE-ME12 | 10SW016198 | Mercedes-Benz CLS |
| CR61-GDB2-218CA-642LS-EU6OPS_4X2_3S_NAG3_VARA-ME11 | 10SW008692 | Mercedes-Benz CLS |
| CR61-GDB2-218CA-642LS-EU6OPS_4X2_3S_NAG3_VARB-ME11 | 10SW008693 | Mercedes-Benz CLS-Class |
| CR61-GDB2-218CA-642LS-EU6OPS_4X4_3S_NAG3-ME09 | 10SW004305 | Mercedes-Benz CLS350 |
| CR61-GDB2-218XA-642LS-EU6OPS_4X2_3S_NAG3_DVE-ME12 | 1037524982 | Mercedes-Benz E350 |
| CR61-GDB2-218XA-642LS-EU6OPS_4X2_3S_NAG3_DVE-ME12 | 10SW016201 | Mercedes-Benz E350 |
| CR61-GDB2-218XA-642LS-EU6OPS_4X2_3S_NAG3_VARA-ME11 | 10SW008696 | Mercedes-Benz CLS350, Mercedes-Benz CLS |
| CR61-GDB2-218XA-642LS-EU6OPS_4X4_3S_NAG3-ME09 | 10SW004306 | Mercedes-Benz CLS |