Original file
Mercedes-Benz E-Class Bosch EDC17CP57 CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARB-ME16 / 10SW054413
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E-Class, hardware number CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARB-ME16 and software number 10SW054413, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E-Class3.0 diesel 257PS
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARB-ME16
- Software number
- 10SW054413
- Software / calibration
- 6429026603
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E-Class |
| Engine | 3.0 diesel 257PS |
| Power | 257.0PS / 189.0kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARB-ME16 |
| Software number | 10SW054413 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | aef2e9a15ec02694 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW054413 | Offset in the file: 0x02001A |
| Software / calibration | 6429026603 | Offset in the file: 0x081509 |
| Data set number | 6429030315 | Offset in the file: 0x081514 |
| Boot software | 0009040200 | Offset in the file: 0x0814FE |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_GHB0__CV192300/// | Offset in the file: 0x021140 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARB-ME16 and software number 10SW054413. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Mercedes-Benz CLS350 | 4,096.00 KB | €15 | Add to cart |
All reads of CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARB-ME16 / 10SW054413
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_RED_NOXTT3-ME22 | 10SW083107 | Mercedes-Benz |
| CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARA-ME16 | 1037524982 | Mercedes-Benz |
| CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARA-ME16 | 10SW054411 | Mercedes-Benz E-Class T-Model, Mercedes-Benz E350 |
| CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARA_NOXTT3-ME16 | 10SW054412 | Mercedes-Benz E350 |
| CR61-GHB0-212WSA-642LS-EU6OPS_4X2_3S_NAG3_VARB_NOXTT3-ME16 | 10SW054414 | Mercedes-Benz E350 |
| CR61-GHB0-218CA-642LS-EU6OPS_4X2_3S_NAG3_DVE-ME18 | 10SW054399 | Mercedes-Benz CLK350, Mercedes-Benz CLS350 |
| CR61-GHB0-218CA-642LS-EU6OPS_4X2_3S_NAG3_VARA-ME18 | 10SW054397 | Mercedes-Benz CLS350, Mercedes-Benz CLS |
| CR61-GHB0-218CA-642LS-EU6OPS_4X2_3S_NAG3_VARA_NOXTT3-ME18 | 1037524982 | Mercedes-Benz C320 |