Original file
Mercedes-Benz G Bosch EDC17CP57 CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02 / 10SW007245
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz G, hardware number CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02 and software number 10SW007245, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Gdiesel 244PS
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02
- Software number
- 10SW007245
- Software / calibration
- 6429024002
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | G |
| Engine | diesel 244PS |
| Displacement | 3.0 |
| Power | 244.7PS / 180.0kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02 |
| Software number | 10SW007245 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | d6a07d4f2c9ea244 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW007245 | Offset in the file: 0x22001A |
| Software / calibration | 6429024002 | Offset in the file: 0x27D635 |
| Data set number | 6429034110 | Offset in the file: 0x27D640 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_HDB1__CV151500/// | Offset in the file: 0x221140 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02 and software number 10SW007245. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Mercedes-Benz G350 | 896.00 KB | €15 | Add to cart |
| Mercedes-Benz G | 2,048.00 KB | €15 | Add to cart |
| Mercedes-Benz G350 | 4,096.00 KB | €15 | Add to cart |
All reads of CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02 / 10SW007245
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-HDB1-292CA-642LS-JAPANOPS_4X4_3S-ME09 | 10SW006603 | Mercedes-Benz GLE350 |
| CR61-HDB1-GW463-642LS-180KW-EU6OPS-002_ME01 | 1037524982 | Mercedes-Benz GLE 350CDI |
| CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02 | 007245 | Mercedes-Benz G350 |
| CR61-HDB1-GW463-642LS-180KW-EU6OPS-008_ME02 | 1037524982 | Mercedes-Benz G, Mercedes-Benz G350, Mercedes-Benz GLS350 |
| CR61-HDB2-166WA-642LS-EU1_4X4_ROMAX_3S-ME15 | 10SW013273 | Mercedes-Benz GLE |
| CR61-HDB2-166WA-642LS-EU4O_4X4_ROMAX_3S-ME15 | 10SW013272 | Mercedes-Benz GLE |
| CR61-HDB2-166WA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 | 1037524982 | Mercedes-Benz GLE |
| CR61-HDB2-166WA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 | 10SW013263 | Mercedes-Benz GLE |