Original file
Mercedes-Benz GLE Bosch EDC17CP57 CR61-HDB2-166XA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 / 10SW013266
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLE, hardware number CR61-HDB2-166XA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 and software number 10SW013266, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz GLE3.0 diesel 258PS
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 896.00 KB · Flash
- Hardware number
- CR61-HDB2-166XA-642LS-EU6OPS_4X4_ROMAX_3S-ME15
- Software number
- 10SW013266
- Software / calibration
- 6429026102
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | GLE |
| Engine | 3.0 diesel 258PS |
| Power | 258PS / 189.8kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-HDB2-166XA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 |
| Software number | 10SW013266 |
| File type | Original flash read |
|---|---|
| File size | 896.00 KB (917,504 bytes) |
| File key | 9700f03b245e2a01 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW013266 | Offset in the file: 0x00001A |
| Software / calibration | 6429026102 | Offset in the file: 0x05D635 |
| Data set number | 6429032811 | Offset in the file: 0x05D640 |
| Boot software | 0009040200 | Offset in the file: 0x05D62A |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_HDB2__CV161400/// | Offset in the file: 0x001140 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-HDB2-166XA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 and software number 10SW013266. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Mercedes-Benz GL350 | 4,096.00 KB | €15 | Add to cart |
All reads of CR61-HDB2-166XA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 / 10SW013266
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-HDB2-166XA-642LS-CHINAOPS_4X4_ROMAX_3S-ME15 | 10SW013268 | Mercedes-Benz GLE |
| CR61-HDB2-166XA-642LS-EU1_4X4_ROMAX_3S-ME15 | 10SW013275 | Mercedes-Benz GLE |
| CR61-HDB2-166XA-642LS-EU4O_4X4_ROMAX_3S-ME15 | 10SW013274 | Mercedes-Benz GLE |
| CR61-HDB2-166XA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 | 1037524982 | Mercedes-Benz ML |
| CR61-HDB2-166XA-642LS-RUSSLAND_EU6OPS_4X4_ROMAX_3S-ME15 | 10SW013267 | Mercedes-Benz GLE, Mercedes-Benz GLS 350, Mercedes-Benz GLS350CDI X166 |
| CR61-HDB2-292CA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 | 1037524982 | Mercedes-Benz GLE, Mercedes-Benz GLE 2016y 3.0CDI |
| CR61-HDB2-292CA-642LS-EU6OPS_4X4_ROMAX_3S-ME15 | 10SW013298 | Mercedes-Benz GLE |
| CR61-HDB2-292CA-642LS-EU6OPS_4x4_Romax_3S-ME15 | 013298 | Mercedes-Benz GLE 350CDI |