Original file
Mercedes-Benz S Bosch EDC17CP57 CR61-HDH1-222WA-642LS-EU6OPS_4X2_3S_ECO2_LL-ME13 / 10SW001575
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz S, hardware number CR61-HDH1-222WA-642LS-EU6OPS_4X2_3S_ECO2_LL-ME13 and software number 10SW001575, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Sdiesel 258PS
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 896.00 KB · Flash
- Hardware number
- CR61-HDH1-222WA-642LS-EU6OPS_4X2_3S_ECO2_LL-ME13
- Software number
- 10SW001575
- Software / calibration
- 6429022202
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | S |
| Engine | diesel 258PS |
| Displacement | 3.0 |
| Power | 258.0PS / 189.8kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-HDH1-222WA-642LS-EU6OPS_4X2_3S_ECO2_LL-ME13 |
| Software number | 10SW001575 |
| File type | Original flash read |
|---|---|
| File size | 896.00 KB (917,504 bytes) |
| File key | 70f14add28bde117 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW001575 | Offset in the file: 0x00001A |
| Software / calibration | 6429022202 | Offset in the file: 0x05D741 |
| Data set number | 6429034405 | Offset in the file: 0x05D74C |
| Boot software | 0009040200 | Offset in the file: 0x05D736 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_HDH1__CV151800/// | Offset in the file: 0x001140 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-HDH1-222WA-642LS-EU6OPS_4X2_3S_ECO2_LL-ME13 and software number 10SW001575. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Mercedes-Benz S | 2,048.00 KB | €15 | Add to cart |
All reads of CR61-HDH1-222WA-642LS-EU6OPS_4X2_3S_ECO2_LL-ME13 / 10SW001575
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-HDBB-GW463-642LS-180KW-EU5OPS_CHINA-009_ME02 | 1037524982 | Mercedes-Benz G350 |
| CR61-HDBB-GW463-642LS-180KW-EU6OPS-009_ME04 | 033048 | Mercedes-Benz G350 |
| CR61-HDBB-GW463-642LS-180KW-EU6OPS-009_ME04 | 1037524982 | Mercedes-Benz G |
| CR61-HDBB-GW463-642LS-180KW-EU6OPS-009_ME04 | 10SW033048 | Mercedes-Benz G |
| CR61-HDH1-222WA-642LS-EU6OPS_4X4_3S_ECO2_LL-ME15 | 1037524982 | Mercedes-Benz S |
| CR61-HDH1-222WA-642LS-EU6OPS_4X4_3S_ECO2_LL-ME15 | 10SW006198 | Mercedes-Benz S |
| CR61-HDH1-222WA-642LS-EU6OPS_4X4_3S_ECO2_LL_DVE-ME17 | 1037524982 | Mercedes-Benz S350 |
| CR61-HDH1-222WA-642LS-EU6OPS_4X4_3S_ECO2_LL_DVE-ME17 | 10SW016190 | Mercedes-Benz S |