Original file
Mercedes-Benz E350 Bosch EDC17CP57 CR61-K4E0-213WSA-642LS-EU6OPS_4X2-ME16 / 022858
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number CR61-K4E0-213WSA-642LS-EU6OPS_4X2-ME16 and software number 022858, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E3503.0 diesel · 258.0PS / 189.8kW
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR61-K4E0-213WSA-642LS-EU6OPS_4X2-ME16
- Software number
- 022858
- Bosch part / software
- 10SW022858
- Software / calibration
- 6429027302
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E350 |
| Engine | 3.0 diesel |
| Power | 258.0PS / 189.8kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-K4E0-213WSA-642LS-EU6OPS_4X2-ME16 |
| Software number | 022858 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | d7570266a964d36e |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW022858 | Offset in the file: 0x02001A |
| Software / calibration | 6429027302 | Offset in the file: 0x080469 |
| Data set number | 6429031812 | Offset in the file: 0x080474 |
| Boot software | 0009040200 | Offset in the file: 0x08045E |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_K4E0__CV160900/// | Offset in the file: 0x021538 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-K4E0-213WSA-642LS-EU6OPS_4X2-ME16 and software number 022858. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-J4E0-213WSA-642LS-EU6OPS_4x2-ME15_02 | 022857 | Mercedes-Benz E350 |
| CR61-J4E0-213WSA-642LS-EU6OPS_4x2-ME15_02 | 1037524982 | Mercedes-Benz E350, Mercedes-Benz C350 |
| CR61-J4E0-213WSA-642LS-EU6OPS_4x2-ME15_02 | 10SW022857 | Mercedes-Benz |
| CR61-K4E0-213WSA-642LS-EU6OPS_4 | 022858 | Mercedes-Benz E350 |
| CR61-K4H0-253CXA-642LS-EU6OPS_4X4_3S_ECO2-ME03_02 | 1037524982 | Mercedes-Benz GLC350 |
| CR61-K4H0-253CXA-642LS-EU6OPS_4x4_3S_Eco2-ME03_02 | 014103 | Mercedes-Benz GLC |
| CR61-K4H0-253CXA-642LS-EU6OPS_4x4_3S_Eco2-ME03_02 | 10SW014103P695K4H0 | Mercedes-Benz GLC350 |
| CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4X2-ME19 | 1037524982 | Mercedes-Benz E-Class, Mercedes-Benz E |