Original file
Mercedes-Benz E350 Bosch EDC17CP57 CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x4-ME20 / 025759
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz E350, hardware number CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x4-ME20 and software number 025759, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E350OM642 · 265.0PS / 194.9kW
- Control unit
- Bosch EDC17CP57
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x4-ME20
- Software number
- 025759
- Bosch part / software
- 10SW025759
- Software / calibration
- 6429022203
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E350 |
| Engine | OM642 |
| Fuel | Diesel |
| Displacement | 3.0 |
| Power | 265.0PS / 194.9kW |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x4-ME20 |
| Software number | 025759 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | a7f5df7d1315cb59 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 10SW025759 | Offset in the file: 0x02001A |
| Software / calibration | 6429022203 | Offset in the file: 0x081585 |
| Data set number | 6429036912 | Offset in the file: 0x081590 |
| Boot software | 0009040200 | Offset in the file: 0x08157A |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_K8E0__CV171300/// | Offset in the file: 0x021538 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x4-ME20 and software number 025759. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Mercedes-Benz E350 | 2,048.00 KB | €15 | Add to cart |
All reads of CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x4-ME20 / 025759
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4X2-ME19 | 10SW023728 | Mercedes-Benz E, Mercedes-Benz E-Class |
| CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4X4-ME20 | 10SW025759 | Mercedes-Benz E, Mercedes-Benz E350 |
| CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x2-ME19 | 023728 | Mercedes-Benz E350 |
| CR61-K8E0-213WSA-642LS-EU6OPS_AJ17_4x2-ME19 | 1037524982 | Mercedes-Benz E350 |
| CR61-K8E0-238CAA-642LS-EU6OPS_AJ17_4x4-ME20 | 026245 | Mercedes-Benz E350 |
| CR61-K8H0-253CXA-642LS-EU6_2_OPS_4X4_3S_ECO2-ME06 | 10SW026753 | Mercedes-Benz GLC350 |
| CR61-K9H0-253CXA-642LS-EU6_2_OPS_4x4_3S_Eco2-ME07_02 | 038814 | Mercedes-Benz GLC350 |
| CR61-KEE0-213WSA-642LS-EU4O_4X2-ME18 | 10SW025743 | Mercedes-Benz E |