Original file
Mercedes-Benz Bosch EDC17CP57 CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME21 / 1037524982
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz, hardware number CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME21 and software number 1037524982, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-BenzOM642
- Control unit
- Bosch EDC17CP57
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME21
- Software number
- 1037524982
- Bosch part / software
- 10SW050798
- Software / calibration
- 6429023803
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Engine | OM642 |
| Fuel | Diesel |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME21 |
| Software number | 1037524982 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 389f292e223457e8 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW050798 | Offset in the file: 0x02001A |
| Software / calibration | 6429023803 | Offset in the file: 0x02022F |
| Data set number | 6429038814 | Offset in the file: 0x2817A8 |
| Boot software | 0009040200 | Offset in the file: 0x00FC4D |
| Internal build string | 001_2.2.00_CFG03 | Offset in the file: 0x00FC24 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_KJE0__CV185100/// | Offset in the file: 0x0603C0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME21 and software number 1037524982. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61-KEE0-213WSA-642LS-EU4O_4X2-ME18 | 10SW025743 | Mercedes-Benz E |
| CR61-KJE0-213WSA-642LS-EU6OPS_4 | 050798 | Mercedes-Benz E350 |
| CR61-KJE0-213WSA-642LS-EU6OPS_4 | 1037524982 | Mercedes-Benz E350 |
| CR61-KJE0-213WSA-642LS-EU6OPS_4 | 10SW050798 | Mercedes-Benz E |
| CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME21 | 10SW050798 | Mercedes-Benz E350 |
| CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME26 | 1037524982 | Mercedes-Benz |
| CR61-KJE0-213WSA-642LS-EU6OPS_4X2-ME26 | 10SW079808 | Mercedes-Benz E-Class T-Model, Mercedes-Benz E |
| CR61-KJE0-213WSA-642LS-EU6OPS_AJ161_4X2-ME23 | 1037524982 | Mercedes-Benz E |