Original file

Mercedes-Benz GLC350 Bosch EDC17CP57 CR61-KKH0-253CXA-642LS-EU6OPS_4X4_3S_ECO2-ME09 / 10SW069065

An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz GLC350, hardware number CR61-KKH0-253CXA-642LS-EU6OPS_4X4_3S_ECO2-ME09 and software number 10SW069065, 896.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLC3503.0 diesel 258PS
Control unit
Bosch EDC17CP57
Read type
Calibration only (data set)
File
896.00 KB · Flash
Hardware number
CR61-KKH0-253CXA-642LS-EU6OPS_4X4_3S_ECO2-ME09
Software number
10SW069065
Software / calibration
6429026303

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLC350
Engine3.0 diesel 258PS
Power258.0PS / 189.8kW
Control unit
Control unitBosch EDC17CP57
ECU makerBosch
Hardware numberCR61-KKH0-253CXA-642LS-EU6OPS_4X4_3S_ECO2-ME09
Software number10SW069065
File
File typeOriginal flash read
File size896.00 KB (917,504 bytes)
File key17dc1a31dd58d06b
Identification read from the file
ECU nameEDC17CP57
Read typeCalibration only (data set)
Bosch part / software10SW069065Offset in the file: 0x00001A
Software / calibration6429026303Offset in the file: 0x05FD45
Data set number6429032617Offset in the file: 0x05FD50
Boot software0009040200Offset in the file: 0x05FD3A
Bosch project identifier (EPK)46/1/EDC17CP57/1/P695//P_695_KKH0__CV201200///Offset in the file: 0x001140

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CR61-KKH0-253CXA-642LS-EU6OPS_4X4_3S_ECO2-ME09 and software number 10SW069065. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz GLCFlash2,048.00 KB€15Add to cart

All reads of CR61-KKH0-253CXA-642LS-EU6OPS_4X4_3S_ECO2-ME09 / 10SW069065

Other pairs of Bosch EDC17CP57

Bosch EDC17CP57 original files

The Bosch EDC17CP57 unit page