Original file
Mercedes-Benz Benz GLE350 Bosch EDC17CP57 NAG3-150KW-CH4O / 1037524978
An original (stock) flash read of the Bosch EDC17CP57 control unit, fitted in Mercedes-Benz Benz GLE350, hardware number NAG3-150KW-CH4O and software number 1037524978, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz Benz GLE3503.0 diesel 258BHP
- Control unit
- Bosch EDC17CP57
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- NAG3-150KW-CH4O
- Software number
- 1037524978
- Bosch part / software
- 10SW063328
- Software / calibration
- 6519028303
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | Benz GLE350 |
| Engine | 3.0 diesel 258BHP |
| Control unit | Bosch EDC17CP57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | NAG3-150KW-CH4O |
| Software number | 1037524978 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| From the file name | Mercedes Benz GLE Class GLE350 |
| File key | 34f03ac0a2181217 |
| ECU name | EDC17CP57 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW063328 | Offset in the file: 0x02001A |
| Software / calibration | 6519028303 | Offset in the file: 0x02022F |
| Data set number | 6519038471 | Offset in the file: 0x281274 |
| Boot software | 6519040401 | Offset in the file: 0x00FC4D |
| Internal build string | 001_2.2.00_CFG03 | Offset in the file: 0x00FC24 |
| Bosch project identifier (EPK) | 46/1/EDC17CP57/1/P695//P_695_HQG0__CV195000/// | Offset in the file: 0x066028 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number NAG3-150KW-CH4O and software number 1037524978. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP57
| Hardware | Software | Vehicles |
|---|---|---|
| CR61_470-53Q0-VS40-OM642LS-EU5III-ME2 | 10SW017475 | Mercedes-Benz X, Mercedes-Benz X-Class |
| CR61_470-53Q0-VS40-OM642LS-EU5III-ME2 | 10SW048837 | Mercedes-Benz X-Class |
| CR61_470-53Q0-VS40-OM642LS-EU6C-ME2 | 10SW017475 | Mercedes-Benz X |
| CR61_470-53Q0-VS40-OM642LS-EU6C-ME2 | 10SW048838 | Mercedes-Benz X, Mercedes-Benz X-Class |
| EDC17CP57 | 1037524978 | Mercedes-Benz Sprinter |
| W069064P695 | 1037524978 | Mercedes-Benz Sprinter |
| WDB9076331P | 10SW017688 | Mercedes-Benz Sprinter |
| WDB9076531P | 10SW017688 | Mercedes-Benz Sprinter |