Original file

Kia Mohave Bosch EDC17CP62 41HMW00A00DIS20139110-3A852- / 10SW097026

An original (stock) flash read of the Bosch EDC17CP62 control unit, fitted in Kia Mohave, hardware number 41HMW00A00DIS20139110-3A852- and software number 10SW097026, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Kia Mohave3.0 diesel 249PS
Control unit
Bosch EDC17CP62
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
41HMW00A00DIS20139110-3A852-
Software number
10SW097026

Technical data

Vehicle
BrandKia
Car modelMohave
Engine3.0 diesel 249PS
Power249.0PS / 183.1kW
Control unit
Control unitBosch EDC17CP62
ECU makerBosch
Hardware number41HMW00A00DIS20139110-3A852-
Software number10SW097026
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keydfa538136bcc4eec
Identification read from the file
ECU nameEDC17CP62
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW097026Offset in the file: 0x02001A
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00F30F
Bosch project identifier (EPK)40/1/EDC17_CP62/147/P2002//P2002_G41A///Offset in the file: 0x0452D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP62 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 41HMW00A00DIS20139110-3A852- and software number 10SW097026. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP62

Bosch EDC17CP62 original files

The Bosch EDC17CP62 unit page