Original file

Ford F150 Bosch EDC17CP65 JL3A-14C204-BVL / 10SW048456

An original (stock) flash read of the Bosch EDC17CP65 control unit, fitted in Ford F150, hardware number JL3A-14C204-BVL and software number 10SW048456, 3,968.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford F1503.0 diesel 260PS
Control unit
Bosch EDC17CP65
Read type
OBD read (no boot area)
File
3,968.00 KB · Flash
Hardware number
JL3A-14C204-BVL
Software number
10SW048456

Technical data

Vehicle
BrandFord
Car modelF150
Engine3.0 diesel 260PS
Power260.0PS / 191.2kW
Control unit
Control unitBosch EDC17CP65
ECU makerBosch
Hardware numberJL3A-14C204-BVL
Software number10SW048456
File
File typeOriginal flash read
File size3,968.00 KB (4,063,232 bytes)
File keyc985899a68281a4c
Identification read from the file
ECU nameEDC17CP65
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW048456Offset in the file: 0x00001A
Software / calibrationJL3A-14C204-BVLOffset in the file: 0x1DFF4B
Bosch project identifier (EPK)38/1/EDC17CP65/57/P1583//P1583_1010///Offset in the file: 0x1D42EF

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP65 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JL3A-14C204-BVL and software number 10SW048456. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP65

HardwareSoftwareVehicles
JL3A-12B684-BNA10SW062949Ford F 150 3.0D V6
JL3A-14C204-EKD10SW062949Ford F150
JL3A-14C558-BA10SW029995Ford F150
JL3A-14C558-BA10SW065373Ford F150

Bosch EDC17CP65 original files

The Bosch EDC17CP65 unit page