Original file
Ford Bosch EDC17CP65 JL3A-14C558-BA / 10SW029995
An original (stock) flash read of the Bosch EDC17CP65 control unit, fitted in Ford, hardware number JL3A-14C558-BA and software number 10SW029995, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford6.7 · 245PS / 180.2kW
- Control unit
- Bosch EDC17CP65
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Hardware number
- JL3A-14C558-BA
- Software number
- 10SW029995
- Bosch part / software
- 10SW065373
- Vehicle maker's hardware number
- JL3A-12A650-BPB
- Software / calibration
- JL3A-12B684-BNA
Technical data
| Brand | Ford |
|---|---|
| Engine | 6.7 |
| Fuel | Diesel |
| Power | 245PS / 180.2kW |
| Control unit | Bosch EDC17CP65 |
|---|---|
| ECU maker | Bosch |
| Hardware number | JL3A-14C558-BA |
| Software number | 10SW029995 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 7a307bd67db9ee89 |
| ECU name | EDC17CP65 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW065373 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | JL3A-12A650-BPB | Offset in the file: 0x00FD30 |
| Software / calibration | JL3A-12B684-BNA | Offset in the file: 0x00FD00 |
| Engine description | JL3A-14C204-BVN | Offset in the file: 0x1FFF4B |
| Bosch project identifier (EPK) | 38/1/EDC17CP65/57/P1583//P1583_1030/// | Offset in the file: 0x1F43BB |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP65 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number JL3A-14C558-BA and software number 10SW029995. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other reads of this pair
The same hardware and software numbers, read from other vehicles or at other times; each has its page.
| Vehicles | Size | Price | Add to cart |
|---|---|---|---|
| Ford F150 | 4,096.00 KB | €15 | Add to cart |
| Ford F150 | 4,096.00 KB | €15 | Add to cart |
Other pairs of Bosch EDC17CP65
| Hardware | Software | Vehicles |
|---|---|---|
| JL3A-12B684-BNA | 10SW062949 | Ford F 150 3.0D V6 |
| JL3A-14C204-BVL | 10SW048456 | Ford F150 |
| JL3A-14C204-EKD | 10SW062949 | Ford F150 |
| JL3A-14C558-BA | 10SW065373 | Ford F150 |