Original file

Volvo S60 Bosch EDC17CP68 31405898 / 10SW032155

An original (stock) flash read of the Bosch EDC17CP68 control unit, fitted in Volvo S60, hardware number 31405898 and software number 10SW032155, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo S602.4 · 205.0PS / 150.8kW
Control unit
Bosch EDC17CP68
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
31405898
Software number
10SW032155
Software / calibration
31405898 AC

Technical data

Vehicle
BrandVolvo
Car modelS60
Engine2.4
FuelDiesel
Power205.0PS / 150.8kW
Control unit
Control unitBosch EDC17CP68
ECU makerBosch
Hardware number31405898
Software number10SW032155
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd7be91a8fe2f13c9
Identification read from the file
ECU nameEDC17CP68
Read typeCalibration only (data set)
Bosch part / software10SW032155Offset in the file: 0x14001A
Software / calibration31405898 ACOffset in the file: 0x195EE6
Bosch project identifier (EPK)54/1/EDC17_CP68/19/P_1424//C1424SH40C_V250DelivUpd1///Offset in the file: 0x1422F4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP68 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 31405898 and software number 10SW032155. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP68

Bosch EDC17CP68 original files

The Bosch EDC17CP68 unit page