Original file

Volvo XC60 Bosch EDC17CP68 315A_Y352_ERAD_SH40C_CVC250DU1_CFPP3_Norway_M06 / 1037541245

An original (stock) flash read of the Bosch EDC17CP68 control unit, fitted in Volvo XC60, hardware number 315A_Y352_ERAD_SH40C_CVC250DU1_CFPP3_Norway_M06 and software number 1037541245, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volvo XC602.4 diesel 163PS
Control unit
Bosch EDC17CP68
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
315A_Y352_ERAD_SH40C_CVC250DU1_CFPP3_Norway_M06
Software number
1037541245
Bosch part / software
10SW032136
Software / calibration
31405898 AC

Technical data

Vehicle
BrandVolvo
Car modelXC60
Engine2.4 diesel 163PS
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17CP68
ECU makerBosch
Hardware number315A_Y352_ERAD_SH40C_CVC250DU1_CFPP3_Norway_M06
Software number1037541245
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key9cd81e99d6fec684
Identification read from the file
ECU nameEDC17CP68
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software10SW032136Offset in the file: 0x02001A
Software / calibration31405898 ACOffset in the file: 0x395EE6
Boot software31355883 AAOffset in the file: 0x00FC1B
Bosch project identifier (EPK)54/1/EDC17_CP68/19/P_1424//C1424SH40C_V250DelivUpd1///Offset in the file: 0x03D008

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP68 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 315A_Y352_ERAD_SH40C_CVC250DU1_CFPP3_Norway_M06 and software number 1037541245. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP68

Bosch EDC17CP68 original files

The Bosch EDC17CP68 unit page