Original file

Volkswagen VAG Bosch EDC17CP74 03N906026E / 10SW099490

An original (stock) flash read of the Bosch EDC17CP74 control unit, fitted in Volkswagen VAG, hardware number 03N906026E and software number 10SW099490, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen VAG2.0 diesel 239PS
Control unit
Bosch EDC17CP74
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03N906026E
Software number
10SW099490
Vehicle maker's hardware number
03N907309

Technical data

Vehicle
BrandVolkswagen
Car modelVAG
Engine2.0 diesel 239PS
Power239.3PS / 176.0kW
Control unit
Control unitBosch EDC17CP74
ECU makerBosch
Hardware number03N906026E
Software number10SW099490
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0d45eeeb9f0dbb63
Identification read from the file
ECU nameEDC17CP74
Read typeFull read (boot area included)
Bosch part / software10SW099490Offset in the file: 0x30301A
Vehicle maker's hardware number03N907309Offset in the file: 0x3B81B0
Software / calibration03N906026E · version 7524Offset in the file: 0x3B81CA
Bosch project identifier (EPK)37/1/EDC17CP74/5/P1275//C1275BO8K3///Offset in the file: 0x3047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03N906026E and software number 10SW099490. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP74

HardwareSoftwareVehicles
03N906026E1037553898Volkswagen Passat
03N906026E1037554601Volkswagen Passat
03N906026E10SW003215Volkswagen Passat
03N906026E10SW007220Volkswagen Passat
03N906026J03N907309Volkswagen Tiguan
03N906026J040741Škoda Kodiaq 2.0 Bi-TDI CR, Škoda Tiguan 2.0 TDI CR DPF, Volkswagen
03N906026J10SW030393Volkswagen Tiguan
03N906026J10SW040741Škoda Kodiaq, Škoda Kodiaq RS, Audi

Bosch EDC17CP74 original files

The Bosch EDC17CP74 unit page