Original file

Volkswagen Passat Bosch EDC17CP74 03N906026K / 03N907309

An original (stock) flash read of the Bosch EDC17CP74 control unit, fitted in Volkswagen Passat, hardware number 03N906026K and software number 03N907309, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat2.0 diesel 240PS
Control unit
Bosch EDC17CP74
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03N906026K
Software number
03N907309
Bosch part / software
10SW040742

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine2.0 diesel 240PS
Control unit
Control unitBosch EDC17CP74
ECU makerBosch
Hardware number03N906026K
Software number03N907309
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key881ed7dc690ac17f
Identification read from the file
ECU nameEDC17CP74
Read typeCalibration only (data set)
Bosch part / software10SW040742Offset in the file: 0x10301A
Vehicle maker's hardware number03N907309Offset in the file: 0x1C5A84
Software / calibration03N906026K · version 6585Offset in the file: 0x1C5A9E
Bosch project identifier (EPK)37/1/EDC17CP74/5/P1275//C1275BO8R0///Offset in the file: 0x1047FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP74 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03N906026K and software number 03N907309. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP74

HardwareSoftwareVehicles
03N906026J10SW030393Volkswagen Tiguan
03N906026J10SW040741Škoda Kodiaq, Škoda Kodiaq RS, Audi
03N906026J10SW040741 1275O8R0Škoda Kodiaq 2.0 BiTDI
03N906026J10SW049096Volkswagen Tiguan
03N906026K040742Volkswagen Passat 2.0 TDI
03N906026K10SW040742Volkswagen Passat, Audi
03N906026K10SW049104Volkswagen Arteon, Audi
03N906026L03N907309Škoda Kodiaq, Škoda Kodiaq RS

Bosch EDC17CP74 original files

The Bosch EDC17CP74 unit page