Original file
CASE 370 Bosch EDC17CV41 P_662_EDC17CV41_D30.hex / 10SW002265
An original (stock) flash read of the Bosch EDC17CV41 control unit, fitted in CASE 370, hardware number P_662_EDC17CV41_D30.hex and software number 10SW002265, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- CASE 3708.7 diesel 370PS
- Control unit
- Bosch EDC17CV41
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- P_662_EDC17CV41_D30.hex
- Software number
- 10SW002265
- Software / calibration
- P_662_EDC17CV41_D30
Technical data
| Brand | CASE |
|---|---|
| Car model | 370 |
| Engine | 8.7 diesel 370PS |
| Power | 370.0PS / 272.1kW |
| Control unit | Bosch EDC17CV41 |
|---|---|
| ECU maker | Bosch |
| Hardware number | P_662_EDC17CV41_D30.hex |
| Software number | 10SW002265 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | a1d34f212b014815 |
| ECU name | EDC17CV41 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1767 | |
| Bosch part / software | 10SW002265 | Offset in the file: 0x01401A |
| Software / calibration | P_662_EDC17CV41_D30 | Offset in the file: 0x0613C0 |
| Bosch project identifier (EPK) | 48/1/EDC17CV41/242/P_662//P_662_EDC17CV41_D30/// | Offset in the file: 0x0613C0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CV41 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number P_662_EDC17CV41_D30.hex and software number 10SW002265. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CV41
| Hardware | Software | Vehicles |
|---|---|---|
| ACW957832A_1.hex | 1037527575 | Valtra N134 |
| ACX348522B_1.hex | 1037527575 | Valtra T175ED |
| DL06-LDE04_A58 | 1037519711 | Doosan |
| P1300.2.3.0_EDC17CV41 | 1037527575 | Valtra N174 |
| P1300_2_3_0 | Massey Ferguson MF 5XXX | |
| P1300_2_3_1 | 1837097469 | Massey Ferguson MF 5XXX |
| P1736_1_5_1.hex | 1037527575 | Valtra T175D, Valtra Harvesters, Komatsu |
| P_662_EDC17CV41_D30.hex | 1037511206 | Claas Arion |