Original file
Valtra N174 Bosch EDC17CV41 P1300.2.3.0_EDC17CV41 / 1037527575
An original (stock) flash read of the Bosch EDC17CV41 control unit, fitted in Valtra N174, hardware number P1300.2.3.0_EDC17CV41 and software number 1037527575, 3,072.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Valtra N1744.5 diesel 201PS
- Control unit
- Bosch EDC17CV41
- Read type
- Full read (boot area included)
- File
- 3,072.00 KB · Flash
- Hardware number
- P1300.2.3.0_EDC17CV41
- Software number
- 1037527575
Technical data
| Brand | Valtra |
|---|---|
| Car model | N174 |
| Engine | 4.5 diesel 201PS |
| Power | 201.0PS / 147.8kW |
| Control unit | Bosch EDC17CV41 |
|---|---|
| ECU maker | Bosch |
| Hardware number | P1300.2.3.0_EDC17CV41 |
| Software number | 1037527575 |
| File type | Original flash read |
|---|---|
| File size | 3,072.00 KB (3,145,728 bytes) |
| File key | a517d77f4c2a4028 |
| Read type | Full read (boot area included) | |
|---|---|---|
| Processor | TC1797 | |
| Bosch part / software | 1037527575 | Offset in the file: 0x01801A |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CV41 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number P1300.2.3.0_EDC17CV41 and software number 1037527575. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CV41
| Hardware | Software | Vehicles |
|---|---|---|
| ACW957815A_1.hex | 1037527575 | Valtra T234 |
| ACW957832A_1.hex | 1037527575 | Valtra N134 |
| ACX348522B_1.hex | 1037527575 | Valtra T175ED |
| DL06-LDE04_A58 | 1037519711 | Doosan |
| P1300_2_3_0 | Massey Ferguson MF 5XXX | |
| P1300_2_3_1 | 1837097469 | Massey Ferguson MF 5XXX |
| P1736_1_5_1.hex | 1037527575 | Valtra T175D, Valtra Harvesters, Komatsu |
| P_662_EDC17CV41_D30.hex | 1037511206 | Claas Arion |