Original file

International Prostar Bosch EDC17CV42 0281020159 / 1037512030

An original (stock) flash read of the Bosch EDC17CV42 control unit, fitted in International Prostar, hardware number 0281020159 and software number 1037512030, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
International Prostardiesel 450PS
Control unit
Bosch EDC17CV42
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0281020159
Software number
1037512030
Software / calibration
P_810_3_15_1

Technical data

Vehicle
BrandInternational
Car modelProstar
Enginediesel 450PS
Power450.0PS / 331.0kW
Control unit
Control unitBosch EDC17CV42
ECU makerBosch
Hardware number0281020159
Software number1037512030
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6f78c604e29f5e38
Identification read from the file
ECU nameEDC17CV42
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037512030Offset in the file: 0x01801A
Software / calibrationP_810_3_15_1Offset in the file: 0x0576EC
Bosch project identifier (EPK)41/1/EDC17CV42/304/P_810//P_810_3_15_1///Offset in the file: 0x0576EC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CV42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281020159 and software number 1037512030. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CV42

HardwareSoftwareVehicles
1037508919Claas Jaguar
1037512030International Prostar, International Maxxforce, International MaxxForce 13
1037551400MAN TGM
10SW065693Fendt 930 Vario
0281020273MAN TGX
02810202731037508917MAN, MAN TGS, MAN TGX
0417RA00100001037508917MAN TGX, MAN TGS
06X907B06X907BMAN

Bosch EDC17CV42 original files

The Bosch EDC17CV42 unit page