Original file
Fendt 930 Vario Bosch EDC17CV42 10SW065693
An original (stock) flash read of the Bosch EDC17CV42 control unit, fitted in Fendt 930 Vario, software number 10SW065693, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Fendt 930 Vario9.1 diesel 300PS
- Control unit
- Bosch EDC17CV42
- Read type
- OBD read (no boot area)
- File
- 4,096.00 KB · Flash
- Software number
- 10SW065693
- Software / calibration
- P1550_1_8_3
Technical data
| Brand | Fendt |
|---|---|
| Car model | 930 Vario |
| Engine | 9.1 diesel 300PS |
| Power | 300.0PS / 220.6kW |
| Control unit | Bosch EDC17CV42 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW065693 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | b8e7ba33f02f65ba |
| ECU name | EDC17CV42 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW065693 | Offset in the file: 0x01801A |
| Software / calibration | P1550_1_8_3 | Offset in the file: 0x339C80 |
| Bosch project identifier (EPK) | 41/1/EDC17CV42/5360/P1550//P1550_1_8_3/// | Offset in the file: 0x339C80 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CV42 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW065693. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CV42
| Hardware | Software | Vehicles |
|---|---|---|
| 1037508917 | MAN TGX, MAN TGS, MAN | |
| 1037508919 | Claas Jaguar | |
| 1037512030 | International Prostar, International Maxxforce, International MaxxForce 13 | |
| 1037551400 | MAN TGM | |
| 0281020159 | 1037512030 | International Prostar |
| 0281020273 | MAN TGX | |
| 0281020273 | 1037508917 | MAN, MAN TGS, MAN TGX |
| 0417RA0010000 | 1037508917 | MAN TGX, MAN TGS |