Original file

MAN TGX Bosch EDC17CV42 25804-3213 / 25804-4019

An original (stock) flash read of the Bosch EDC17CV42 control unit, fitted in MAN TGX, hardware number 25804-3213 and software number 25804-4019, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
MAN TGX10.5 diesel 400PS
Control unit
Bosch EDC17CV42
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
25804-3213
Software number
25804-4019
Software / calibration
P_700_5_5_1

Technical data

Vehicle
BrandMAN
Car modelTGX
Engine10.5 diesel 400PS
Power400PS / 294.2kW
Control unit
Control unitBosch EDC17CV42
ECU makerBosch
Hardware number25804-3213
Software number25804-4019
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyeb2c31627ac90226
Identification read from the file
ECU nameEDC17CV42
Read typeOBD read (no boot area)
Software / calibrationP_700_5_5_1Offset in the file: 0x0D72D8
Bosch project identifier (EPK)39/1/EDC17CV42/36/P_700//P_700_5_5_1///Offset in the file: 0x0D72D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CV42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 25804-3213 and software number 25804-4019. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CV42

Bosch EDC17CV42 original files

The Bosch EDC17CV42 unit page