Original file
FAW Bosch EDC17CV44 50B4BABDH-X4P-110809-V750
An original (stock) flash read of the Bosch EDC17CV44 control unit, fitted in FAW, software number 50B4BABDH-X4P-110809-V750, 1,792.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- FAW17CV
- Control unit
- Bosch EDC17CV44
- Read type
- Full read (boot area included)
- File
- 1,792.00 KB · Flash
- Software number
- 50B4BABDH-X4P-110809-V750
- Software / calibration
- P_903_7_6_2_FULL_SCR
Technical data
| Brand | FAW |
|---|---|
| Engine | 17CV |
| Control unit | Bosch EDC17CV44 |
|---|---|
| ECU maker | Bosch |
| Software number | 50B4BABDH-X4P-110809-V750 |
| File type | Original flash read |
|---|---|
| File size | 1,792.00 KB (1,835,008 bytes) |
| From the file name | FAW Bosch P903V762 EDC17CV44 P903V762 |
| File key | 8aad1ec9182e5525 |
| ECU name | EDC17CV44 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1767 | |
| Software / calibration | P_903_7_6_2_FULL_SCR | Offset in the file: 0x072E58 |
| Bosch project identifier (EPK) | 52/1/EDC17CV44_5_B3/0/P_903//P_903_7_6_2_FULL_SCR/// | Offset in the file: 0x072E58 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CV44 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 50B4BABDH-X4P-110809-V750. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CV44
| Hardware | Software | Vehicles |
|---|---|---|
| 1037556137 | FAW | |
| 10SW024044 | FAW | |
| 1382_741_ENHANCED | FAW | |
| 1638416384 | JCB | |
| P1186_V780 | Dongfeng | |
| P772V700 | FAW | |
| 0123456789P909V300 | JCB Fastrack, JCB 7614, Massey Ferguson | |
| 837085344.hex | 1037511189 | Valtra N123 |