Original file

Fendt 826 Vario Bosch EDC17CV52

An original (stock) flash read of the Bosch EDC17CV52 control unit, fitted in Fendt 826 Vario, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Fendt 826 Vario6.1 diesel 256PS
Control unit
Bosch EDC17CV52
Read type
Calibration only (data set)
File
2,048.00 KB · Flash

Technical data

Vehicle
BrandFendt
Car model826 Vario
Engine6.1 diesel 256PS
Power256PS / 188.3kW
Control unit
Control unitBosch EDC17CV52
ECU makerBosch
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key7cfa1a81f40f999c
Identification read from the file
Read typeCalibration only (data set)

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CV52 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CV52

HardwareSoftwareVehicles
Fendt 724Fendt 724
Fendt 724 VarioFendt 724 Vario
Fendt 822Fendt 822
Fendt 824Fendt 824
Fendt 828Fendt 828
Fendt 936Fendt 936
FendtFendt
ManitouManitou

Bosch EDC17CV52 original files