Original file

Volvo PENTA Bosch EDC7C1

An original (stock) flash read of the Bosch EDC7C1 control unit, fitted in Volvo PENTA, 452.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Volvo PENTApetrol 310PS
Control unit
Bosch EDC7C1
File size
452.00 KB
Contents
Flash

Technical data

Vehicle
BrandVolvo
Car modelPENTA
Enginepetrol 310PS
Power310.0PS / 228.0kW
Control unit
Control unitBosch EDC7C1
ECU makerBosch
File
File typeOriginal flash read
File size452.00 KB (462,848 bytes)
File key94b50f89dcf36ce5

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC7C1 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC7C1

HardwareSoftwareVehicles
Iveco eurocargoIveco eurocargo
MAN TGAMAN TGA
New Holland TS110ANew Holland TS110A
Volvo 2ePENTAVolvo 2ePENTA
Volvo PentaVolvo Penta
0281Y0326RVolvo Penta
1037365023DAF CF65, DAF F-250, DAF CF 65
1037513105Volvo Penta

Bosch EDC7C1 original files