Original file

MAN TGA Bosch EDC7C32 81790616 / 81790616

An original (stock) flash read of the Bosch EDC7C32 control unit, fitted in MAN TGA, hardware number 81790616 and software number 81790616, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
MAN TGA280PS
Control unit
Bosch EDC7C32
File size
2,048.00 KB
Contents
Flash
Hardware number
81790616
Software number
81790616

Technical data

Vehicle
BrandMAN
Car modelTGA
Engine280PS
Power280.0PS / 205.9kW
Control unit
Control unitBosch EDC7C32
ECU makerBosch
Hardware number81790616
Software number81790616
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key92482a799e8f9f61

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC7C32 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 81790616 and software number 81790616. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC7C32

Bosch EDC7C32 original files