Original file

Fendt 817 Bosch EDC7UC31

An original (stock) flash read of the Bosch EDC7UC31 control unit, fitted in Fendt 817, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Vehicle
Fendt 8176.1 181PS
Control unit
Bosch EDC7UC31
File size
2,048.00 KB
Contents
Flash

Technical data

Vehicle
BrandFendt
Car model817
Engine6.1 181PS
Power181PS / 133.1kW
Control unit
Control unitBosch EDC7UC31
ECU makerBosch
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key72cfc1e21d23b64a

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC7UC31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC7UC31

HardwareSoftwareVehicles
Fendt 714 VARIOFendt 714 VARIO
Fendt 716Fendt 716
Fendt 716 VarioFendt 716 Vario
Fendt 718Fendt 718
Fendt 820Fendt 820
Fendt 936Fendt 936
FendtFendt
Fendt 9030 2002 TurboFendt 9030 2002 Turbo

Bosch EDC7UC31 original files

The Bosch EDC7UC31 unit page