Original file

Valtra A83 Bosch EDC7UC31

An original (stock) flash read of the Bosch EDC7UC31 control unit, fitted in Valtra A83, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Technical data

Vehicle
BrandValtra
Car modelA83
Engine3.3
Fueldiesel
Displacement3.3
Power49.0PS / 36.0kW
Control unit
Control unitBosch EDC7UC31
ECU makerBosch
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key33fd8f748879a9ee
Price€15

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC7UC31 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file. A file written to a unit with other numbers can damage it. Not sure? Give your own read to the search above: it is compared by content.

Other pairs of Bosch EDC7UC31

HardwareSoftwareVehicles
Fendt Vario 718Fendt Vario 718
Massey Ferguson 7485Massey Ferguson 7485
Massey Ferguson MF 5400Massey Ferguson MF 5400
Valtra 8670Valtra 8670
Valtra A93Valtra A93
Valtra N111Valtra N111
Valtra P191Valtra P191
Valtra S352Valtra S352

Bosch EDC7UC31 original files

The Bosch EDC7UC31 unit page