Original file

KTM DUKE Bosch M17.8.42 0261S06674 / 1037518350

An original (stock) flash read of the Bosch M17.8.42 control unit, fitted in KTM DUKE, hardware number 0261S06674 and software number 1037518350, 1,504.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
KTM DUKE1.2 petrol
Control unit
Bosch M17.8.42
File size
1,504.00 KB
Contents
Flash
Hardware number
0261S06674
Software number
1037518350

Technical data

Vehicle
BrandKTM
Car modelDUKE
Engine1.2 petrol
Control unit
Control unitBosch M17.8.42
ECU makerBosch
Hardware number0261S06674
Software number1037518350
File
File typeOriginal flash read
File size1,504.00 KB (1,540,096 bytes)
File keyd83628450256b848

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch M17.8.42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S06674 and software number 1037518350. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch M17.8.42

HardwareSoftwareVehicles
1037528627KTM Duke

Bosch M17.8.42 original files