Original file

Volkswagen Crafter Bosch MD1_CS104 05L906023AL / 10SW072320

An original (stock) flash read of the Bosch MD1_CS104 control unit, fitted in Volkswagen Crafter, hardware number 05L906023AL and software number 10SW072320, 10,240.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Crafter
Control unit
Bosch MD1_CS104
File size
10,240.00 KB
Contents
Flash
Hardware number
05L906023AL
Software number
10SW072320
Bosch part / software
10SW065254

Technical data

Vehicle
BrandVolkswagen
Car modelCrafter
Control unit
Control unitBosch MD1_CS104
ECU makerBosch
Hardware number05L906023AL
Software number10SW072320
File
File typeOriginal flash read
File size10,240.00 KB (10,485,760 bytes)
File key6f7fdcc7bc47befc
Identification read from the file
ECU nameMD1CS104
Bosch part / software10SW065254Offset in the file: 0x000164
Bosch project identifier (EPK)37/1/MD1_CS104/0/P1894//C1894MF8M3///Offset in the file: 0x059A18

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1_CS104 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 05L906023AL and software number 10SW072320. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1_CS104

Bosch MD1_CS104 original files