Original file

Mercedes-Benz Bosch MD1CP001 0001720190 / 1037559020

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz, hardware number 0001720190 and software number 1037559020, 8,704.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benzdiesel 190PS
Control unit
Bosch MD1CP001
File size
8,704.00 KB
Contents
Flash
Hardware number
0001720190
Software number
1037559020
Bosch part / software
10SW039898
Software / calibration
6549025200

Technical data

Vehicle
BrandMercedes-Benz
Enginediesel 190PS
Power190.3PS / 140.0kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0001720190
Software number1037559020
File
File typeOriginal flash read
File size8,704.00 KB (8,912,896 bytes)
File keya4d2f22f9764a21d
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW039898Offset in the file: 0x040144
Software / calibration6549025200Offset in the file: 0x4E0137
Data set number6549031004Offset in the file: 0x75908F
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D///Offset in the file: 0x4E0148

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0001720190 and software number 1037559020. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW087409Mercedes-Benz E
10SW087831Mercedes-Benz E
10SW088201Mercedes-Benz C220d
000062020010SW053619Mercedes-Benz
02604500101037559020Mercedes-Benz E220d
0265490200050963Mercedes-Benz GLE350d
0265490200053619Mercedes-Benz V-Classe
0265490200054910Mercedes-Benz GLE350

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page