Original file

Mercedes-Benz E220d Bosch MD1CP001 0260450010 / 1037559020

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E220d, hardware number 0260450010 and software number 1037559020, 8,448.02 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E220d2.0 diesel 194PS
Control unit
Bosch MD1CP001
File size
8,448.02 KB
Contents
Flash
Hardware number
0260450010
Software number
1037559020
Bosch part / software
10SW002363
Software / calibration
6549023600

Technical data

Vehicle
BrandMercedes-Benz
Car modelE220d
Engine2.0 diesel 194PS
Power194.0PS / 142.7kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0260450010
Software number1037559020
File
File typeOriginal flash read
File size8,448.02 KB (8,650,768 bytes)
File keyfc8489655cf0b875
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002363Offset in the file: 0x000164
Software / calibration6549023600Offset in the file: 0x4D9DFF
Data set number6549030302Offset in the file: 0x75054F
Boot software6569040000Offset in the file: 0x0186D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x4D9E10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0260450010 and software number 1037559020. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW087831Mercedes-Benz E
10SW088201Mercedes-Benz C220d
000062020010SW053619Mercedes-Benz
00017201901037559020Mercedes-Benz
0265490200050963Mercedes-Benz GLE350d
0265490200053619Mercedes-Benz V-Classe
0265490200054910Mercedes-Benz GLE350
02654902001037553293Mercedes-Benz E220, Mercedes-Benz E, Mercedes-Benz E220d

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page