Original file

Mercedes-Benz GLE350d Bosch MD1CP001 0265490200 / 050963

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLE350d, hardware number 0265490200 and software number 050963, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE350dOM654 · 320.0PS / 235.4kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
050963
Bosch part / software
10SW050963
Software / calibration
6549027100

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE350d
EngineOM654
FuelDiesel
Displacement2.0
Power320.0PS / 235.4kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number050963
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keye97fb3f82378012f
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW050963Offset in the file: 0x000144
Software / calibration6549027100Offset in the file: 0x4CAC87
Data set number6549032905Offset in the file: 0x718B5B
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_D050D///Offset in the file: 0x4CAC98

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 050963. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
10SW088201Mercedes-Benz C220d
000062020010SW053619Mercedes-Benz
00017201901037559020Mercedes-Benz
02604500101037559020Mercedes-Benz E220d
0265490200053619Mercedes-Benz V-Classe
0265490200054910Mercedes-Benz GLE350
02654902001037553293Mercedes-Benz E220, Mercedes-Benz E, Mercedes-Benz E220d
02654902001037559020Mercedes-Benz E, Mercedes-Benz E220d, Mercedes-Benz E-Class

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page