Original file

Mercedes-Benz GLE350 Bosch MD1CP001 0265490200 / 054910

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz GLE350, hardware number 0265490200 and software number 054910, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLE350OM656 · 272.0PS / 200.1kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
054910
Bosch part / software
10SW054910
Software / calibration
6549027600

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE350
EngineOM656
FuelDiesel
Displacement3.0
Power272.0PS / 200.1kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number054910
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keybe922cc94b0308be
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW054910Offset in the file: 0x000144
Software / calibration6549027600Offset in the file: 0x4A0497
Data set number6569033901Offset in the file: 0x719297
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B082D///Offset in the file: 0x4A04A8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 054910. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
00017201901037559020Mercedes-Benz
02604500101037559020Mercedes-Benz E220d
0265490200050963Mercedes-Benz GLE350d
0265490200053619Mercedes-Benz V-Classe
02654902001037553293Mercedes-Benz E220, Mercedes-Benz E, Mercedes-Benz E220d
02654902001037559020Mercedes-Benz E, Mercedes-Benz E220d, Mercedes-Benz E-Class
026549020010SW002363Mercedes-Benz E220, Mercedes-Benz E, Mercedes-Benz E-Class
026549020010SW002559Mercedes-Benz E

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page