Original file

Mercedes-Benz S Bosch MD1CP001 0265490200 / 10SW002363

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz S, hardware number 0265490200 and software number 10SW002363, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz S3.0 diesel 340PS
Control unit
Bosch MD1CP001
File size
7,936.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW002363
Software / calibration
6549022400

Technical data

Vehicle
BrandMercedes-Benz
Car modelS
Engine3.0 diesel 340PS
Power340.0PS / 250.1kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number10SW002363
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
File keyeec05bb3f59f019e
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002363Offset in the file: 0x000164
Software / calibration6549022400Offset in the file: 0x4BBC87
Data set number6569035800Offset in the file: 0x73DD85
Boot software6569040000Offset in the file: 0x0186D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_8051D///Offset in the file: 0x4BBC98

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW002363. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz E220dFlash7,936.00 KB€20Add to cart
Mercedes-Benz E-ClassFlash7,936.00 KB€20Add to cart
Mercedes-Benz EFlash7,936.00 KB€20Add to cart
Mercedes-Benz C220Flash · From the file name: L533CC07,936.00 KB€20Add to cart
Mercedes-Benz EFlash8,192.00 KB€20Add to cart
Mercedes-Benz E220Flash8,192.00 KB€20Add to cart
Mercedes-Benz CLS350Flash7,936.00 KB€20Add to cart
Mercedes-BenzFlash8,192.00 KB€20Add to cart
Mercedes-BenzFlash8,192.00 KB€20Add to cart
Mercedes-Benz C-ClassFlash7,936.00 KB€20Add to cart
Mercedes-Benz C220dFlash8,192.00 KB€20Add to cart
Mercedes-Benz E-Class CoupeFlash7,936.00 KB€20Add to cart

All reads of 0265490200 / 10SW002363

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
0265490200053619Mercedes-Benz V-Classe
0265490200054910Mercedes-Benz GLE350
02654902001037553293Mercedes-Benz E220, Mercedes-Benz E, Mercedes-Benz E220d
02654902001037559020Mercedes-Benz E, Mercedes-Benz E220d, Mercedes-Benz E-Class
026549020010SW002559Mercedes-Benz E
026549020010SW019732Mercedes-Benz E220
026549020010SW021370Mercedes-Benz E220, Mercedes-Benz E200
026549020010SW021551Mercedes-Benz S, Mercedes-Benz S350

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page