Original file

Mercedes-Benz Bosch MD1CP001 0265490200 / 10SW027171

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz, hardware number 0265490200 and software number 10SW027171, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benzdiesel · 286.0PS / 210.4kW
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW027171
Software / calibration
6549025200

Technical data

Vehicle
BrandMercedes-Benz
Enginediesel
Displacement2.0
Power286.0PS / 210.4kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number10SW027171
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keye222ab6e94c3e93c
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW027171Offset in the file: 0x00C144
Software / calibration6549025200Offset in the file: 0x4E0137
Data set number6569036803Offset in the file: 0x75908F
Boot software6549041300Offset in the file: 0x0186D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_B070D///Offset in the file: 0x4E0148

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW027171. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz E-ClassFlash · From the file name: L533CC07,936.00 KB€20Add to cart
Mercedes-Benz VitoFlash7,936.00 KB€20Add to cart
Mercedes-Benz VitoFlash · From the file name: L533CC07,936.00 KB€20Add to cart
Mercedes-Benz VitoFlash8,192.00 KB€20Add to cart
Mercedes-Benz VitoFlash7,936.00 KB€20Add to cart
Mercedes-BenzFlash7,936.00 KB€20Add to cart
Mercedes-Benz GLCFlash8,192.00 KB€20Add to cart
Mercedes-BenzFlash7,936.00 KB€20Add to cart
Mercedes-Benz GFlash7,936.00 KB€20Add to cart
Mercedes-Benz C300dFlash7,936.00 KB€20Add to cart
Mercedes-Benz GLEFlash8,192.00 KB€20Add to cart
Mercedes-Benz CFlash24,320.00 KB€20Add to cart

All reads of 0265490200 / 10SW027171

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
026549020010SW019732Mercedes-Benz E220
026549020010SW021370Mercedes-Benz E220, Mercedes-Benz E200
026549020010SW021551Mercedes-Benz S, Mercedes-Benz S350
026549020010SW024842Mercedes-Benz CLS400, Mercedes-Benz E200, Mercedes-Benz CLS350
026549020010SW032157Mercedes-Benz E220, Mercedes-Benz C, Mercedes-Benz C300d
026549020010SW032716Mercedes-Benz E300, Mercedes-Benz E220, Mercedes-Benz E200
026549020010SW034695Mercedes-Benz E350, Mercedes-Benz E, Mercedes-Benz E400
026549020010SW039898Mercedes-Benz GLC, Mercedes-Benz G400d, Mercedes-Benz GLc200

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page