Original file

Mercedes-Benz E350 Bosch MD1CP001 0265490200 / 10SW034695

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz E350, hardware number 0265490200 and software number 10SW034695, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3503.0 diesel 285PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW034695
Software / calibration
6549023700

Technical data

Vehicle
BrandMercedes-Benz
Car modelE350
Engine3.0 diesel 285PS
Power285.5PS / 210.0kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number10SW034695
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keye1faa890f7cb99bb
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW034695Offset in the file: 0x000144
Software / calibration6549023700Offset in the file: 0x49A637
Data set number6569032001Offset in the file: 0x710697
Boot software6569040000Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A060D///Offset in the file: 0x49A648

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW034695. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz EFlash8,192.00 KB€20Add to cart
Mercedes-Benz E400Flash · From the file name: 3488,192.00 KB€20Add to cart
Mercedes-Benz CLS400Flash · From the file name: 3498,192.00 KB€20Add to cart

All reads of 0265490200 / 10SW034695

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
026549020010SW024842Mercedes-Benz CLS400, Mercedes-Benz E200, Mercedes-Benz CLS350
026549020010SW027171Mercedes-Benz Vito, Mercedes-Benz GLC, Mercedes-Benz GLE
026549020010SW032157Mercedes-Benz E220, Mercedes-Benz C, Mercedes-Benz C300d
026549020010SW032716Mercedes-Benz E300, Mercedes-Benz E220, Mercedes-Benz E200
026549020010SW039898Mercedes-Benz GLC, Mercedes-Benz G400d, Mercedes-Benz GLc200
026549020010SW047382Mercedes-Benz Benz E 220D MD1CP001
026549020010SW048227Mercedes-Benz V-classe, Mercedes-Benz V
026549020010SW050963Mercedes-Benz GLE

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page