Original file

Mercedes-Benz Benz E 220D MD1CP001 Bosch MD1CP001 0265490200 / 10SW047382

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz Benz E 220D MD1CP001, hardware number 0265490200 and software number 10SW047382, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz Benz E 220D MD1CP001143KW
Control unit
Bosch MD1CP001
File size
7,936.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW047382
Bosch part / software
10SW002363
Software / calibration
6549023600

Technical data

Vehicle
BrandMercedes-Benz
Car modelBenz E 220D MD1CP001
Engine143KW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number10SW047382
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
From the file nameMercedes Benz 220D 213 238
File key7c1a14198780e955
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW002363Offset in the file: 0x000164
Software / calibration6549023600Offset in the file: 0x4D9DFF
Data set number6549032504Offset in the file: 0x75054F
Boot software6569040000Offset in the file: 0x0186D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_A050D///Offset in the file: 0x4D9E10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW047382. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
026549020010SW032157Mercedes-Benz E220, Mercedes-Benz C, Mercedes-Benz C300d
026549020010SW032716Mercedes-Benz E300, Mercedes-Benz E220, Mercedes-Benz E200
026549020010SW034695Mercedes-Benz E350, Mercedes-Benz E, Mercedes-Benz E400
026549020010SW039898Mercedes-Benz GLC, Mercedes-Benz G400d, Mercedes-Benz GLc200
026549020010SW048227Mercedes-Benz V-classe, Mercedes-Benz V
026549020010SW050963Mercedes-Benz GLE
026549020010SW053213Mercedes-Benz E220, Mercedes-Benz E
026549020010SW053619Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz V Class

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page