Original file

Mercedes-Benz V Bosch MD1CP001 0265490200 / 10SW048227

An original (stock) flash read of the Bosch MD1CP001 control unit, fitted in Mercedes-Benz V, hardware number 0265490200 and software number 10SW048227, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz V3.0 diesel 239PS
Control unit
Bosch MD1CP001
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW048227
Software / calibration
6549024100

Technical data

Vehicle
BrandMercedes-Benz
Car modelV
Engine3.0 diesel 239PS
Power239.0PS / 175.8kW
Control unit
Control unitBosch MD1CP001
ECU makerBosch
Hardware number0265490200
Software number10SW048227
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key9e6da0da240c4965
Identification read from the file
ECU nameMD1CP001
Bosch part / software10SW048227Offset in the file: 0x000144
Software / calibration6549024100Offset in the file: 0x4A2527
Data set number6549037004Offset in the file: 0x71906B
Boot software6549041300Offset in the file: 0x7D86D5
Bosch project identifier (EPK)46/1/MD1CP001/1/DA_MDG1D//DA_MDG1D_0M_C060D///Offset in the file: 0x4A2538

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MD1CP001 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW048227. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz V-classeFlash8,192.00 KB€20Add to cart

All reads of 0265490200 / 10SW048227

Other pairs of Bosch MD1CP001

HardwareSoftwareVehicles
026549020010SW032716Mercedes-Benz E300, Mercedes-Benz E220, Mercedes-Benz E200
026549020010SW034695Mercedes-Benz E350, Mercedes-Benz E, Mercedes-Benz E400
026549020010SW039898Mercedes-Benz GLC, Mercedes-Benz G400d, Mercedes-Benz GLc200
026549020010SW047382Mercedes-Benz Benz E 220D MD1CP001
026549020010SW050963Mercedes-Benz GLE
026549020010SW053213Mercedes-Benz E220, Mercedes-Benz E
026549020010SW053619Mercedes-Benz Vito, Mercedes-Benz V-Klasse, Mercedes-Benz V Class
026549020010SW054612Mercedes-Benz E400

Bosch MD1CP001 original files

The Bosch MD1CP001 unit page